Tag Archives: cable chain

China OEM Engineering Enclosed Plastic Roller Drag Cable Chain

Product Description

Product description

Bridge-type engineering plastic towline has the characteristics of fast moving speed, wear resistance, high temperature
resistance, no deformation, low noise, flexible assembly and disassembly, heavy load, high speed movement, long service life,etc., and is widely used in three-dimensional warehouses, large machinery, Machine tools etc. as short-distance, synchronized movements of oil, steam, water hoses and cables.

Product picture

Basic parameters of drag chains

1.Material:reinforced nylon. It can stand with high pressure and has good tensile strength,toughness and elasticity ,wearing and falmable resisance.
2.Resistances:It is oil and acceleration is 5m/sec.(specfic speed and acceleration depends on specific).
3.Service life:Under normal conmal condition,5 million reciprocating motions can be reached(which is also related to the operating conditions.)
Technical data:

Tensile strength 180N/mm2 Volume resistance 1571-1015
Impact strength 50Kj/m2 Water Absorption 4%
Tenprature range -40.C-130.C Friction factor 0.3
Surface resistaned 1571-1012 Falme resistance HB(UL49)

Characteristics and Applications of Drag chains

1.The product can be used for such locations where repciprocating motions are required so that internally installed cables.oil pipes,gastubes and water tubes can be draged and protected.
2.Each joint of the chain can be opened up so as to facilitate repairs and maintenance.It can also be operated under high speed.
3.The drag  chains have already extensively used in digital-controlled machine tools.electronic equipment,machinery for stone windows.moulding injectors,manipulators,lifting and transport equipment and automatic warehouses,etc.

Construction of the drag chains:

1.The appearance of the chain looks like the crawler of a tank consisting of certain number of joints ,The joints of crawler are freely turned round.
2.The same series of chain hsa same inner height and out height and same pitch but the inner herght radius R can be made per different specifications.
3.A unti chain joint is consisting of a left-right chain plate and updown cover.Each chain joint can be piened up so as to facilitate assembly and dismantal without threading.Cables,oil pipes and gaspipes can be put into the drag chain after the cover plate is opened.
4.Spacers are available for use,which are able to divide the space inside the chain into divisions according to requirements.

Installation for cable frag chains:

1.Put a screw driver vertically into the opening hole at both ends of the cover and then open the cover .Put the drag chain for cables and oip pipes according to the instructions provided .Put the cover back.Note that the fixed end and the moving end of a cable should be fixed by using a tension device
2.When used in a long sliding service,it is recommended to use a guiding grove,Please ask our technical personnel about the usage of the guiding grove.

Product application

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Plastic
Structure: Roller Chain
Surface Treatment: Polishing
Chain Size: 1/2"*3/32"
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Pitch: 45mm-180mm
Customization:
Available

|

Customized Request

engineering chain

How do engineering chains compare to other types of chains in terms of efficiency?

Engineering chains are known for their high efficiency in power transmission compared to some other types of chains. Their efficiency can be attributed to several factors:

  • Minimal Friction: Engineering chains are designed with precision rollers and bushings, which reduces friction between the chain’s components. This results in less energy loss during power transmission.
  • High-Quality Materials: These chains are typically made from high-quality materials, such as alloy steel, which ensures durability and minimal elongation under heavy loads. This material choice helps maintain efficiency over extended periods of use.
  • Precise Manufacturing: Engineering chains are manufactured with tight tolerances and precise engineering, ensuring consistent performance and smooth operation. This precision minimizes energy losses due to chain misalignment or uneven loading.
  • Optimized Design: The design of engineering chains takes into account the specific requirements of power transmission, making them well-suited for their intended applications. This optimized design contributes to their overall efficiency.
  • Proper Lubrication: Regular and proper lubrication of engineering chains is essential to maintain their efficiency. Adequate lubrication reduces friction and wear, optimizing power transfer efficiency.

Compared to some other types of chains, such as standard roller chains, engineering chains may offer higher efficiency due to their advanced design and manufacturing processes. However, the choice of chain type depends on the specific application requirements, load conditions, operating environment, and other factors.

In certain applications, other power transmission methods like belts or gears might be preferred over chains, based on factors such as noise level, space constraints, and maintenance considerations. Each power transmission method has its advantages and limitations, and selecting the most suitable option requires careful consideration of the application’s needs.

engineering chain

What are the environmental considerations when using engineering chains?

When using engineering chains in various applications, there are several environmental considerations to keep in mind to ensure optimal performance, longevity, and safety. These considerations include:

1. Temperature: Extreme temperatures, whether high or low, can affect the performance and lifespan of engineering chains. Proper lubrication and material selection are essential to ensure the chain can withstand the temperature conditions in the operating environment.

2. Corrosive Environments: In corrosive environments, such as those with exposure to chemicals, saltwater, or other corrosive substances, it’s crucial to choose engineering chains made from corrosion-resistant materials, such as stainless steel or coatings that provide protection against corrosion.

3. Dust and Contaminants: Dust, dirt, and other contaminants can accumulate on the chain, leading to increased wear and reduced efficiency. Regular cleaning and proper chain guarding can help minimize the impact of these environmental factors.

4. Moisture and Water Exposure: For applications exposed to moisture or water, selecting chains with appropriate sealing or corrosion-resistant coatings is important to prevent rust and maintain performance.

5. UV Exposure: Outdoor applications exposed to direct sunlight can be subject to UV degradation. Using engineering chains with UV-resistant materials or protective coatings can help mitigate the effects of UV exposure.

6. Noise and Vibration: Certain environments may have strict noise regulations. In such cases, using chain guides, dampers, or other noise-reducing features can help lower the noise and vibration levels produced by the chain.

7. Load Variation: Environmental conditions may lead to variations in the load on the chain. Understanding and accommodating load variations is crucial for ensuring the chain’s reliability and preventing premature failure.

8. Compliance with Regulations: Some industries have specific environmental regulations that must be adhered to. It’s essential to select engineering chains that comply with these regulations to maintain a safe and environmentally friendly operation.

9. Maintenance and Lubrication: Proper and regular maintenance, including lubrication, is critical to ensure the chain’s smooth operation and extend its service life in any environment.

Considering these environmental factors will help in selecting the right engineering chain for a particular application, ensuring optimal performance, and reducing the risk of chain failure due to environmental conditions.

engineering chain

What materials are engineering chains typically made of?

Engineering chains are commonly made from a variety of durable and high-strength materials to ensure their performance and longevity in demanding industrial applications. The choice of material depends on factors such as the application’s requirements, environmental conditions, and the specific type of engineering chain. Some of the typical materials used for engineering chains include:

1. Carbon Steel: Carbon steel is a popular choice for engineering chains due to its excellent strength and affordability. It is suitable for many standard industrial applications where moderate strength and resistance to wear are required.

2. Alloy Steel: Alloy steel offers higher strength and better resistance to wear and fatigue compared to carbon steel. It is commonly used in heavy-duty and high-stress applications, such as mining equipment and construction machinery.

3. Stainless Steel: Stainless steel is chosen for its corrosion resistance properties, making it ideal for applications where the chain may be exposed to moisture, chemicals, or harsh environments. It is commonly used in food processing, pharmaceuticals, and outdoor applications.

4. Nickel-Plated Steel: Nickel-plated steel chains provide enhanced corrosion resistance while retaining the strength of carbon or alloy steel. They are often used in applications where both strength and corrosion resistance are important.

5. Plastic: In some cases, engineering chains may be constructed entirely from plastic or have plastic components. Plastic chains are commonly used in industries requiring low noise, lightweight, and corrosion resistance, such as the food and beverage industry and packaging applications.

6. Other Specialty Materials: Depending on the specific requirements of an application, engineering chains may also be made from other specialty materials like bronze, zinc-plated steel, or coated chains to meet particular needs.

The choice of material is crucial in determining the performance, longevity, and suitability of the engineering chain for a specific application. Manufacturers provide information on the material composition of their chains, allowing users to select the most appropriate material based on the intended use and operating conditions.

China OEM Engineering Enclosed Plastic Roller Drag Cable Chain  China OEM Engineering Enclosed Plastic Roller Drag Cable Chain
editor by CX 2024-04-13

China factory Engineering Enclosed Plastic Roller Drag Cable Chain

Product Description

Product description

Bridge-type engineering plastic towline has the characteristics of fast moving speed, wear resistance, high temperature
resistance, no deformation, low noise, flexible assembly and disassembly, heavy load, high speed movement, long service life,etc., and is widely used in three-dimensional warehouses, large machinery, Machine tools etc. as short-distance, synchronized movements of oil, steam, water hoses and cables.

Product picture

Basic parameters of drag chains

1.Material:reinforced nylon. It can stand with high pressure and has good tensile strength,toughness and elasticity ,wearing and falmable resisance.
2.Resistances:It is oil and acceleration is 5m/sec.(specfic speed and acceleration depends on specific).
3.Service life:Under normal conmal condition,5 million reciprocating motions can be reached(which is also related to the operating conditions.)
Technical data:

Tensile strength 180N/mm2 Volume resistance 1571-1015
Impact strength 50Kj/m2 Water Absorption 4%
Tenprature range -40.C-130.C Friction factor 0.3
Surface resistaned 1571-1012 Falme resistance HB(UL49)

Characteristics and Applications of Drag chains

1.The product can be used for such locations where repciprocating motions are required so that internally installed cables.oil pipes,gastubes and water tubes can be draged and protected.
2.Each joint of the chain can be opened up so as to facilitate repairs and maintenance.It can also be operated under high speed.
3.The drag  chains have already extensively used in digital-controlled machine tools.electronic equipment,machinery for stone windows.moulding injectors,manipulators,lifting and transport equipment and automatic warehouses,etc.

Construction of the drag chains:

1.The appearance of the chain looks like the crawler of a tank consisting of certain number of joints ,The joints of crawler are freely turned round.
2.The same series of chain hsa same inner height and out height and same pitch but the inner herght radius R can be made per different specifications.
3.A unti chain joint is consisting of a left-right chain plate and updown cover.Each chain joint can be piened up so as to facilitate assembly and dismantal without threading.Cables,oil pipes and gaspipes can be put into the drag chain after the cover plate is opened.
4.Spacers are available for use,which are able to divide the space inside the chain into divisions according to requirements.

Installation for cable frag chains:

1.Put a screw driver vertically into the opening hole at both ends of the cover and then open the cover .Put the drag chain for cables and oip pipes according to the instructions provided .Put the cover back.Note that the fixed end and the moving end of a cable should be fixed by using a tension device
2.When used in a long sliding service,it is recommended to use a guiding grove,Please ask our technical personnel about the usage of the guiding grove.

Product application

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Plastic
Structure: Roller Chain
Surface Treatment: Polishing
Chain Size: 1/2"*3/32"
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Pitch: 45mm-180mm
Customization:
Available

|

Customized Request

engineering chain

Can engineering chains be repaired or must they be completely replaced?

Unlike some other components, engineering chains are generally not designed to be repaired. Once an engineering chain shows signs of wear, damage, or elongation, it is recommended to replace the entire chain rather than attempting repairs. Here are the reasons why engineering chains are typically replaced instead of repaired:

1. Safety Concerns: Engineering chains are critical components in industrial applications, often responsible for transmitting high loads and operating at high speeds. If a chain fails due to a repair that was not performed correctly, it can lead to serious safety hazards and potential accidents.

2. Complex Design: Engineering chains have a complex design with various components, including pins, rollers, bushings, and plates. Repairing these components and restoring them to their original specifications is difficult and may not guarantee the same level of performance and reliability as a new chain.

3. Cost-Effectiveness: In many cases, repairing an engineering chain can be more costly and time-consuming than simply replacing it. Additionally, a repaired chain may have a shorter service life, leading to more frequent replacements in the future.

4. System Integrity: Engineering chains work as part of a larger system, engaging with sprockets and other components. If a repaired chain does not fit perfectly within the system, it can cause misalignment, premature wear, and reduced performance.

5. Manufacturer Recommendations: Chain manufacturers usually recommend replacing the entire chain when it shows signs of wear or elongation. Following these recommendations ensures that the system operates as intended and maintains its reliability.

Considering the critical role of engineering chains in various industrial applications, it is best to prioritize safety, reliability, and system performance by replacing worn or damaged chains with new ones. Regular maintenance, proper lubrication, and timely replacements will help extend the service life of the engineering chains and contribute to the overall efficiency of the machinery and equipment.

engineering chain

What are the environmental considerations when using engineering chains?

When using engineering chains in various applications, there are several environmental considerations to keep in mind to ensure optimal performance, longevity, and safety. These considerations include:

1. Temperature: Extreme temperatures, whether high or low, can affect the performance and lifespan of engineering chains. Proper lubrication and material selection are essential to ensure the chain can withstand the temperature conditions in the operating environment.

2. Corrosive Environments: In corrosive environments, such as those with exposure to chemicals, saltwater, or other corrosive substances, it’s crucial to choose engineering chains made from corrosion-resistant materials, such as stainless steel or coatings that provide protection against corrosion.

3. Dust and Contaminants: Dust, dirt, and other contaminants can accumulate on the chain, leading to increased wear and reduced efficiency. Regular cleaning and proper chain guarding can help minimize the impact of these environmental factors.

4. Moisture and Water Exposure: For applications exposed to moisture or water, selecting chains with appropriate sealing or corrosion-resistant coatings is important to prevent rust and maintain performance.

5. UV Exposure: Outdoor applications exposed to direct sunlight can be subject to UV degradation. Using engineering chains with UV-resistant materials or protective coatings can help mitigate the effects of UV exposure.

6. Noise and Vibration: Certain environments may have strict noise regulations. In such cases, using chain guides, dampers, or other noise-reducing features can help lower the noise and vibration levels produced by the chain.

7. Load Variation: Environmental conditions may lead to variations in the load on the chain. Understanding and accommodating load variations is crucial for ensuring the chain’s reliability and preventing premature failure.

8. Compliance with Regulations: Some industries have specific environmental regulations that must be adhered to. It’s essential to select engineering chains that comply with these regulations to maintain a safe and environmentally friendly operation.

9. Maintenance and Lubrication: Proper and regular maintenance, including lubrication, is critical to ensure the chain’s smooth operation and extend its service life in any environment.

Considering these environmental factors will help in selecting the right engineering chain for a particular application, ensuring optimal performance, and reducing the risk of chain failure due to environmental conditions.

engineering chain

What are the maintenance requirements for engineering chains?

Maintaining engineering chains is essential to ensure their longevity, reliable performance, and safe operation in industrial applications. The following are key maintenance requirements for engineering chains:

1. Regular Inspection: Conduct routine visual inspections of the chain to check for signs of wear, corrosion, or damage. Look for elongation, bent or broken links, and worn sprocket engagement areas.

2. Lubrication: Proper and timely lubrication is crucial for reducing friction and wear between chain components. Lubricate the chain using a suitable lubricant as recommended by the manufacturer.

3. Tension Adjustment: Check and adjust the chain’s tension regularly to maintain the correct amount of slack. Proper tension ensures efficient power transmission and minimizes stress on the chain and sprockets.

4. Cleaning: Keep the chain clean and free from debris, dirt, and contaminants that may accelerate wear and corrosion. Use appropriate cleaning methods and solutions that do not damage the chain’s surface.

5. Replace Worn Components: Replace any worn or damaged components, such as chain links or sprockets, promptly to prevent further damage and potential chain failure.

6. Avoid Overloading: Do not subject the engineering chain to loads exceeding its capacity. Overloading can lead to premature wear and failure.

7. Environmental Considerations: Consider the environment in which the chain operates. In corrosive or harsh environments, choose chains with appropriate coatings or materials to resist corrosion.

8. Follow Manufacturer’s Recommendations: Adhere to the manufacturer’s maintenance guidelines and recommended service intervals specific to the engineering chain model and application.

9. Training and Safety: Ensure that personnel handling the chain are properly trained in maintenance procedures and safety protocols.

10. Record Keeping: Maintain detailed records of maintenance activities, inspections, and replacements to track the chain’s condition and performance over time.

By following these maintenance requirements, industrial operators can extend the life of engineering chains, prevent unplanned downtime, and ensure safe and efficient operation in their respective applications.

China factory Engineering Enclosed Plastic Roller Drag Cable Chain  China factory Engineering Enclosed Plastic Roller Drag Cable Chain
editor by CX 2024-03-28

China Custom Engineering Plastic Cable Chain POM Chain Delrin Chain

Product Description


engineering plastic cable chain POM chain delrin chain

Advantages:

1.A complete range of specification

2.free design offer OEM & ODM

3.free sample available

4.professional service team

5.specialize CNC machining and injection over 10 years

6.Custom accept as per drawing or sample

 

Model                  

inejction POM conveyor chain

Material

POM / Nylon/ PVC or customized

Diameter 1-250mm or customized
Length 500mm,1000mmor customized 
Color Natural,White,Black,ect.
OEM & ODM Yes
Certification ISO9001,SGS,FDA,RoHS,Test Report,ect.
Free Sample Yes
Density 1.6g/ cm2
Shape sheet, rod, tube, gear, pulley, guide rail……or according to your demand
Packing Plastic bags,Cartons,Wodden case,Pallet,Container,ect.
Advantage One stop procurement
 

HangZhou Engineering Plastics Industries,aiming at providing engineering plastics and injection plastic parts. Ccompany owns whole sets of imported manufacturing machines and advanced CNC machining machines,besides advanced process tools,company technology are also tremendous.

FAQ

Q: Are you trading company or manufacturer ?

A: We are manufacturer.

Q: How long is your delivery time?

A: According to the difficulty and quantity of product processing,a reasonable arrival time will be given to you.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What are the after-sale services?

A: In case of quality problems, the package can be exchanged within 90 days.

 

Material: Plastic
Structure: Leaf Chain
Surface Treatment: Polishing
Chain Size: 1/2"*3/32"
Feature: Fire Resistant, Heat Resistant
Certificate: ISO9001: 2008, Test Report
Customization:
Available

|

Customized Request

engineering chain

How do engineering chains handle variable speed requirements?

Engineering chains are designed to handle variable speed requirements in power transmission systems. They are capable of accommodating a wide range of speeds without compromising their performance or durability. Here’s how engineering chains handle variable speed conditions:

  • Flexible Design: Engineering chains are constructed with a flexible design that allows them to adapt to changes in speed. The chain’s links and rollers can smoothly engage and disengage with the sprockets, ensuring efficient power transmission even at varying speeds.
  • Smooth Operation: The precision manufacturing of engineering chains ensures smooth and consistent operation across different speed ranges. This smooth operation reduces vibration and noise, minimizing wear and tear on the chain and sprockets.
  • Lubrication: Proper lubrication is essential for engineering chains to handle variable speed conditions. Lubrication reduces friction between the chain’s components, preventing premature wear and enhancing the chain’s ability to operate effectively at different speeds.
  • Load Distribution: Engineering chains distribute the transmitted load evenly across their links, reducing stress concentration points. This load distribution capability enables the chain to handle varying torque and speed requirements without compromising its strength or performance.
  • High-Quality Materials: The use of high-quality materials in engineering chains ensures their ability to withstand the rigors of variable speed applications. High-grade alloy steels or stainless steels are often used to enhance the chain’s strength, durability, and resistance to fatigue.
  • Proper Tensioning: Maintaining the appropriate tension in the engineering chain is crucial for reliable performance at varying speeds. Proper tensioning prevents chain slack and excessive wear, ensuring the chain remains engaged with the sprockets at all times.
  • Variable Pitch Chains: In some applications, engineers may opt for variable pitch chains. These chains have special designs that allow them to accommodate variable speed conditions more effectively.

By considering factors such as chain design, lubrication, load distribution, material quality, and tensioning, engineering chains can smoothly handle variable speed requirements in various industrial applications. Ensuring proper maintenance and selecting the appropriate chain type for the specific application will maximize the chain’s performance and service life.

engineering chain

Can engineering chains be used in marine or underwater applications?

Yes, engineering chains can be used in marine or underwater applications under certain conditions. However, several factors need to be considered to ensure their reliable performance and longevity in such environments:

1. Corrosion Resistance: Marine and underwater environments expose chains to the risk of corrosion due to saltwater exposure. Therefore, it’s crucial to select engineering chains made from corrosion-resistant materials such as stainless steel or special coatings to prevent rust and deterioration.

2. Sealing and Lubrication: Proper sealing and lubrication are essential to protect the chain’s internal components from water ingress and corrosion. Sealed or encapsulated chain designs with suitable lubricants can help maintain smooth operation even in wet conditions.

3. Material Selection: The choice of materials for the chain and sprockets should consider not only corrosion resistance but also the ability to withstand marine environments’ unique challenges, such as exposure to marine organisms, debris, and changing temperatures.

4. Load Capacity: Marine and underwater applications may involve heavy loads, so the engineering chain must be selected based on the specific load requirements to ensure safe and reliable operation.

5. Water Depth and Pressure: The depth of the underwater application and the resulting pressure can affect the chain’s performance. Special considerations may be necessary for deep-sea applications to withstand higher pressures.

6. Environmental Regulations: Depending on the location, there may be specific environmental regulations regarding the materials used in marine applications to prevent pollution and protect marine life.

7. Maintenance and Inspection: Regular maintenance and inspection are critical for identifying and addressing any signs of wear, corrosion, or damage in the engineering chain. Timely maintenance can extend the chain’s lifespan and ensure safe operation.

Overall, with proper material selection, sealing, lubrication, and maintenance, engineering chains can be used effectively in marine or underwater applications, providing reliable power transmission and motion control in these challenging environments.

engineering chain

Can engineering chains be used in high-speed applications?

Yes, engineering chains can be used in high-speed applications, but their suitability depends on various factors. While some engineering chains are designed to handle high-speed operation, others may not be suitable for such applications. Here are some considerations:

1. Chain Type: Different types of engineering chains have varying capabilities when it comes to high-speed operation. For example, roller chains are commonly used in industrial applications and can handle moderate to high speeds efficiently. On the other hand, conveyor chains or specialty chains may have limitations on speed due to their design and intended use.

2. Manufacturer Specifications: Check the manufacturer’s specifications and recommendations for the engineering chain you plan to use. Manufacturers often provide maximum allowable speeds for their chains based on factors such as chain size, material, and construction.

3. Lubrication and Maintenance: Proper lubrication and maintenance are critical for high-speed applications. Adequate lubrication reduces friction and wear, allowing the chain to operate smoothly at higher speeds. Regular maintenance ensures that the chain remains in good condition and minimizes the risk of unexpected failures.

4. Load and Tension: High-speed applications can place additional loads and tension on the engineering chain. It is essential to ensure that the chain can handle the increased loads and tension without stretching excessively or experiencing premature wear.

5. Environmental Conditions: Consider the environmental factors that may affect the chain’s performance at high speeds. Temperature, humidity, and the presence of contaminants can impact the chain’s wear and durability.

6. Safety Considerations: High-speed applications require careful consideration of safety measures. Ensure that all safety guidelines and regulations are followed to prevent accidents or injuries resulting from chain failure.

In summary, engineering chains can be used in high-speed applications, but it is essential to select the appropriate chain type and ensure proper maintenance and lubrication. Consulting with chain manufacturers or experts can help you determine the most suitable engineering chain for your specific high-speed application, ensuring safe and reliable operation.

China Custom Engineering Plastic Cable Chain POM Chain Delrin Chain  China Custom Engineering Plastic Cable Chain POM Chain Delrin Chain
editor by CX 2023-10-17

China Good quality Flexible Plastic Cable Chain Engineering Nylon Drag Chain

Product Description

Product Description

1.Material:reinforced nylon. It can stand with high pressure and has good tensile strength,toughness and elasticity ,wearing and falmable resisance.2.Resistances:It is oil and acceleration is 5m/sec.(specfic speed and acceleration depends on specific).3.Service life:Under normal conmal condition,5 million reciprocating motions can be reached(which is also related to the operating conditions.)

Technical data:

Tensile strength

180N/mm2 Volume resistance 1571-1015
Impact strength 50Kj/m2 Water Absorption 4%
Tenprature range -40.C-130.C Friction factor 0.3
Surface resistaned 1571-1012 Falme resistance HB(UL49)
 

Details

Application
 
The Engineering Plastic Roller Chain Cable Drag Chain has been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machines, injection molding machines, mechanical hands, overweight transportation equipment, automated warehouses.

Installation 

1.Put a screw driver vertically into the opening hole at both ends of the cover and then open the cover .Put the drag chain for cables and oip pipes according to the instructions provided .Put the cover back.Note that the fixed end and the moving end of a cable should be fixed by using a tension device
2.When used in a long sliding service,it is recommended to use a guiding grove,Please ask our technical personnel about the usage of the guiding grove.

Order notice :
 
Kindly please advise the below:
1. Length: 
2. Cable or pipe Max. Dia.:
3. Supporting board type:
4. Bending Radius(or the curved height ):
 

Company Profile

ZheJiang CZPT Conductor Busbar Electrical Co.,Ltd. Is located in ZheJiang ,Established in 2001 and have been involved in this field for more than 10 years.CZPT is professional enterprise in searching and developing the electrical products and engineering.The main products includes:conductor rail system .bus duct system,cable festoon system ,cable drag chain cable tray,lighting busbar and related accessories, our products used in mobile power supply for crane ,electrical hoist .as well as factory,high building power distribution.With excellent products quality ,good service our products are greatly favored bycustomers around the domestic and foreign market, we will devote ourselves to provide better service for the whole world customer.

Packaging & Shipping

Welcome to inquiry ~

 

Surface Treatment: Polishing
Material: Plastic
Bending Radius: 50mm-750mm
Max.Width(mm): 200mm-650mm
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Pitch: 45mm-180mm
Customization:
Available

|

Customized Request

engineering chain

What are the limitations of using engineering chains in certain applications?

While engineering chains are versatile and widely used in various industries, they do have some limitations that should be considered when selecting them for specific applications:

  • Speed Limitations: Engineering chains have a maximum recommended speed limit. High-speed applications may require specialized high-speed chains that are designed to reduce vibration and noise and maintain reliable performance at elevated speeds.
  • Temperature Sensitivity: Extreme temperatures can affect the performance of engineering chains. In high-temperature environments, chains may experience accelerated wear and reduced strength. Similarly, in cryogenic conditions, the chain’s materials may become brittle and prone to breakage.
  • Chemical Exposure: Exposure to corrosive chemicals or harsh environments can lead to chain degradation. Engineering chains used in such conditions should be made from materials that offer corrosion resistance or be appropriately coated to withstand chemical exposure.
  • Shock Loads: While engineering chains can handle moderate shock loads and impact forces, excessive or sudden shock loads can cause chain failure. In applications with significant shock loads, additional measures such as shock-absorbing devices may be required.
  • Maintenance Requirements: Engineering chains require regular maintenance, including proper lubrication and periodic inspection for wear and damage. Failure to maintain the chains can result in premature wear and unexpected failures.
  • Alignment: Engineering chains may not perform optimally in applications with misaligned sprockets. Proper alignment is essential to ensure smooth operation and prevent excessive wear.
  • Environmental Contaminants: Dust, dirt, and debris in certain environments, such as construction sites or agricultural fields, can accumulate on the chain and sprockets, leading to accelerated wear and reduced chain life.
  • Load Capacity: While engineering chains have excellent load-carrying capabilities, applications with extremely high loads may require customized or heavy-duty chains to meet the specific requirements.

Understanding the limitations of engineering chains allows engineers and designers to make informed decisions when selecting the most suitable chain type for their applications. By considering factors like speed, temperature, chemical exposure, shock loads, and maintenance requirements, one can ensure the reliable and efficient performance of engineering chains in various industrial settings.

engineering chain

Can engineering chains be used in low-temperature or cryogenic environments?

Yes, engineering chains can be used in low-temperature or cryogenic environments with appropriate material selection and lubrication. When operating in extremely cold conditions, standard chain materials may become brittle and prone to failure. However, by using special materials and lubricants designed for low temperatures, engineering chains can maintain their performance and reliability.

In cryogenic applications, such as in the aerospace, medical, or scientific industries, where temperatures can reach extremely low levels (typically below -150°C or -238°F), standard steel chains may not be suitable. In such cases, engineers often opt for materials like stainless steel, nickel-plated steel, or other alloys that can withstand cryogenic temperatures without losing their mechanical properties.

Lubrication is another critical consideration in low-temperature environments. Conventional lubricants may freeze or become less effective at extremely cold temperatures, leading to increased friction and wear. Therefore, special lubricants that remain fluid at low temperatures, such as synthetic oils or greases designed for cryogenic use, should be applied to ensure smooth chain operation and reduce wear.

In summary, engineering chains can be used in low-temperature or cryogenic environments, provided that the appropriate materials and lubricants are chosen for the specific application. By selecting the right chain and ensuring proper lubrication, the performance and service life of the engineering chain can be maintained even in extreme cold conditions.

engineering chain

Can engineering chains be used in corrosive or harsh environments?

Yes, engineering chains can be designed and manufactured to withstand corrosive or harsh environments. When operating in such conditions, it is crucial to select the appropriate materials and coatings for the chain to ensure its durability and performance. Here are some considerations for using engineering chains in corrosive or harsh environments:

1. Material Selection: Choose materials that have high corrosion resistance, such as stainless steel or nickel-plated chains. These materials can withstand exposure to moisture, chemicals, and other corrosive agents.

2. Coatings and Surface Treatments: Applying specialized coatings or surface treatments to the chain can further enhance its corrosion resistance. Common coatings include zinc plating, chromate conversion coating, and polymer coatings.

3. Sealed Joints: Opt for engineering chains with sealed joints or special seals to protect the internal components from contaminants and moisture, reducing the risk of corrosion.

4. Environmental Ratings: Some engineering chains may come with specific environmental ratings that indicate their suitability for certain conditions. Check these ratings to ensure the chain is appropriate for the intended environment.

5. Regular Maintenance: Even with corrosion-resistant materials and coatings, regular maintenance is essential. Keep the chain clean, lubricated, and free from debris to prevent corrosion and premature wear.

6. Compatibility with Other Components: Ensure that all components in the chain system, such as sprockets and bearings, are also suitable for use in corrosive environments.

7. Temperature Considerations: Take into account the operating temperature range of the environment. Some materials may perform differently at extreme temperatures, affecting the chain’s overall performance.

8. Chemical Exposure: If the chain will be exposed to specific chemicals or substances, verify that the chosen materials and coatings are resistant to those chemicals.

By carefully selecting the right materials, coatings, and design features, engineering chains can effectively handle corrosive or harsh environments, maintaining their functionality and longevity in challenging industrial applications.

China Good quality Flexible Plastic Cable Chain Engineering Nylon Drag Chain  China Good quality Flexible Plastic Cable Chain Engineering Nylon Drag Chain
editor by CX 2023-09-08

China high quality Engineering Enclosed Plastic Roller Drag Cable Chain

Product Description

Engineering Enclosed Plastic Roller Drag Cable Chain
Picture

Basic parameters of drag chains

1.Material:reinforced nylon. It can stand with high pressure and has good tensile strength,toughness and elasticity ,wearing and falmable resisance.
2.Resistances:It is oil and acceleration is 5m/sec.(specfic speed and acceleration depends on specific).
3.Service life:Under normal conmal condition,5 million reciprocating motions can be reached(which is also related to the operating conditions.)
Technical data:

Tensile strength 180N/mm2 Volume resistance 1571-1015
Impact strength 50Kj/m2 Water Absorption 4%
Tenprature range -40.C-130.C Friction factor 0.3
Surface resistaned 1571-1012 Falme resistance HB(UL49)

Characteristics and Applications of Drag chains

1.The product can be used for such locations where repciprocating motions are required so that internally installed cables.oil pipes,gastubes and water tubes can be draged and protected.
2.Each joint of the chain can be opened up so as to facilitate repairs and maintenance.It can also be operated under high speed.
3.The drag  chains have already extensively used in digital-controlled machine tools.electronic equipment,machinery for stone windows.moulding injectors,manipulators,lifting and transport equipment and automatic warehouses,etc.

Construction of the drag chains:

1.The appearance of the chain looks like the crawler of a tank consisting of certain number of joints ,The joints of crawler are freely turned round.
2.The same series of chain hsa same inner height and out height and same pitch but the inner herght radius R can be made per different specifications.
3.A unti chain joint is consisting of a left-right chain plate and updown cover.Each chain joint can be piened up so as to facilitate assembly and dismantal without threading.Cables,oil pipes and gaspipes can be put into the drag chain after the cover plate is opened.
4.Spacers are available for use,which are able to divide the space inside the chain into divisions according to requirements.

Installation for cable frag chains:

1.Put a screw driver vertically into the opening hole at both ends of the cover and then open the cover .Put the drag chain for cables and oip pipes according to the instructions provided .Put the cover back.Note that the fixed end and the moving end of a cable should be fixed by using a tension device
2.When used in a long sliding service,it is recommended to use a guiding grove,Please ask our technical personnel about the usage of the guiding grove.

 

Material: Plastic
Structure: Roller Chain
Surface Treatment: Polishing
Chain Size: 1/2"*3/32"
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Max.Width(mm): 200mm-650mm
Customization:
Available

|

Customized Request

engineering chain

How do engineering chains handle misalignment between sprockets?

Engineering chains are designed to handle some degree of misalignment between sprockets. Misalignment can occur due to various factors such as improper installation, wear and elongation of the chain, or inaccuracies in the machinery. While some misalignment is inevitable in many industrial applications, excessive misalignment should be avoided to ensure optimal chain performance and longevity.

Here’s how engineering chains handle misalignment:

  1. Flexible Construction: Engineering chains are constructed with flexible components such as pins, rollers, and bushings. This design allows the chain to adapt to minor misalignments without putting excessive stress on the chain or sprockets.
  2. Articulating Joints: The articulating joints in the chain allow it to articulate smoothly around the sprockets, accommodating minor misalignment during the rotation. This helps reduce wear on the chain and sprockets.
  3. Tolerance for Misalignment: Manufacturers provide specifications for the allowable misalignment between sprockets. Engineering chains are designed to handle a certain level of misalignment within these tolerances without significantly affecting their performance.
  4. Proper Installation: Correct installation of the engineering chain is crucial to minimizing misalignment issues. Ensuring proper tension, alignment, and center-to-center distance between sprockets can help reduce misalignment and prolong chain life.
  5. Regular Maintenance: Regular maintenance, including chain inspection and lubrication, can help identify and address misalignment issues early on. Promptly correcting misalignment can prevent further damage and ensure efficient chain operation.
  6. Alignment Devices: In some cases, alignment devices or tools may be used during installation to ensure accurate alignment between the sprockets. These devices can help improve chain performance and reduce wear caused by misalignment.

It is essential to follow the manufacturer’s guidelines for chain installation, maintenance, and alignment to optimize the performance and service life of engineering chains. Addressing misalignment issues promptly and keeping the chain in proper working condition will contribute to the overall reliability and efficiency of the machinery or equipment in which the chain is used.

engineering chain

What are the environmental considerations when using engineering chains?

When using engineering chains in various applications, there are several environmental considerations to keep in mind to ensure optimal performance, longevity, and safety. These considerations include:

1. Temperature: Extreme temperatures, whether high or low, can affect the performance and lifespan of engineering chains. Proper lubrication and material selection are essential to ensure the chain can withstand the temperature conditions in the operating environment.

2. Corrosive Environments: In corrosive environments, such as those with exposure to chemicals, saltwater, or other corrosive substances, it’s crucial to choose engineering chains made from corrosion-resistant materials, such as stainless steel or coatings that provide protection against corrosion.

3. Dust and Contaminants: Dust, dirt, and other contaminants can accumulate on the chain, leading to increased wear and reduced efficiency. Regular cleaning and proper chain guarding can help minimize the impact of these environmental factors.

4. Moisture and Water Exposure: For applications exposed to moisture or water, selecting chains with appropriate sealing or corrosion-resistant coatings is important to prevent rust and maintain performance.

5. UV Exposure: Outdoor applications exposed to direct sunlight can be subject to UV degradation. Using engineering chains with UV-resistant materials or protective coatings can help mitigate the effects of UV exposure.

6. Noise and Vibration: Certain environments may have strict noise regulations. In such cases, using chain guides, dampers, or other noise-reducing features can help lower the noise and vibration levels produced by the chain.

7. Load Variation: Environmental conditions may lead to variations in the load on the chain. Understanding and accommodating load variations is crucial for ensuring the chain’s reliability and preventing premature failure.

8. Compliance with Regulations: Some industries have specific environmental regulations that must be adhered to. It’s essential to select engineering chains that comply with these regulations to maintain a safe and environmentally friendly operation.

9. Maintenance and Lubrication: Proper and regular maintenance, including lubrication, is critical to ensure the chain’s smooth operation and extend its service life in any environment.

Considering these environmental factors will help in selecting the right engineering chain for a particular application, ensuring optimal performance, and reducing the risk of chain failure due to environmental conditions.

engineering chain

How do you select the right size and pitch for an engineering chain?

Choosing the correct size and pitch for an engineering chain is essential to ensure optimal performance, longevity, and safety in industrial applications. Here are the steps to guide you in selecting the right engineering chain size and pitch:

1. Identify the Application Requirements: Understand the specific requirements of the application where the engineering chain will be used. Consider factors such as the load to be carried, the speed of operation, the environmental conditions, and any special considerations like corrosion resistance or high-temperature requirements.

2. Determine the Chain Type: Engineering chains come in various types, such as roller chains, conveyor chains, drive chains, and specialty chains. Choose the chain type that best matches the intended application and the type of motion required.

3. Calculate the Chain Pitch: The chain pitch refers to the distance between each roller pin or attachment point on the chain. To calculate the chain pitch, measure the center-to-center distance of any three consecutive pins and divide it by two. Ensure that the calculated pitch matches the chain’s specified pitch.

4. Calculate the Chain Length: Determine the required length of the engineering chain by considering the distance between the sprockets and any additional slack or tension needed for smooth operation. Ensure that the selected chain length is appropriate for the application and fits well without being overly tight or loose.

5. Check Load Capacity and Strength: Refer to the manufacturer’s data or engineering chain catalog to determine the load capacity and strength of the selected chain. Ensure that the chain’s load capacity exceeds the maximum loads expected in the application to prevent premature wear or failure.

6. Consider the Environmental Factors: Take into account any environmental factors that may affect the performance of the engineering chain, such as temperature, moisture, chemicals, or abrasive materials. Choose a chain material that can withstand the specific environmental conditions to ensure longevity.

7. Consult with Manufacturers or Suppliers: If you are uncertain about selecting the right engineering chain, do not hesitate to consult with chain manufacturers or suppliers. They can provide valuable insights and recommendations based on their expertise and knowledge of various applications.

By following these steps and carefully evaluating the application’s requirements, you can select the appropriate size and pitch for an engineering chain, ensuring reliable and efficient operation in your specific industrial setting.

China high quality Engineering Enclosed Plastic Roller Drag Cable Chain  China high quality Engineering Enclosed Plastic Roller Drag Cable Chain
editor by CX 2023-08-11

China high quality Flexible Plastic Cable Chain Engineering Nylon Drag Chain

Product Description

Product Description

1.Material:reinforced nylon. It can stand with high pressure and has good tensile strength,toughness and elasticity ,wearing and falmable resisance.2.Resistances:It is oil and acceleration is 5m/sec.(specfic speed and acceleration depends on specific).3.Service life:Under normal conmal condition,5 million reciprocating motions can be reached(which is also related to the operating conditions.)

Technical data:

Tensile strength

180N/mm2 Volume resistance 1571-1015
Impact strength 50Kj/m2 Water Absorption 4%
Tenprature range -40.C-130.C Friction factor 0.3
Surface resistaned 1571-1012 Falme resistance HB(UL49)
 

Details

Application
 
The Engineering Plastic Roller Chain Cable Drag Chain has been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machines, injection molding machines, mechanical hands, overweight transportation equipment, automated warehouses.

Installation 

1.Put a screw driver vertically into the opening hole at both ends of the cover and then open the cover .Put the drag chain for cables and oip pipes according to the instructions provided .Put the cover back.Note that the fixed end and the moving end of a cable should be fixed by using a tension device
2.When used in a long sliding service,it is recommended to use a guiding grove,Please ask our technical personnel about the usage of the guiding grove.

Order notice :
 
Kindly please advise the below:
1. Length: 
2. Cable or pipe Max. Dia.:
3. Supporting board type:
4. Bending Radius(or the curved height ):
 

Company Profile

ZheJiang CZPT Conductor Busbar Electrical Co.,Ltd. Is located in ZheJiang ,Established in 2001 and have been involved in this field for more than 10 years.CZPT is professional enterprise in searching and developing the electrical products and engineering.The main products includes:conductor rail system .bus duct system,cable festoon system ,cable drag chain cable tray,lighting busbar and related accessories, our products used in mobile power supply for crane ,electrical hoist .as well as factory,high building power distribution.With excellent products quality ,good service our products are greatly favored bycustomers around the domestic and foreign market, we will devote ourselves to provide better service for the whole world customer.

Packaging & Shipping

Welcome to inquiry ~

 

Surface Treatment: Polishing
Material: Plastic
Bending Radius: 50mm-750mm
Max.Width(mm): 200mm-650mm
Feature: Fire Resistant, Oil Resistant, Heat Resistant
Pitch: 45mm-180mm
Customization:
Available

|

Customized Request

engineering chain

What are the signs of wear and when should an engineering chain be replaced?

Identifying signs of wear in an engineering chain is crucial for maintaining the system’s reliability and preventing unexpected failures. Here are some common signs of wear in an engineering chain that indicate it may need replacement:

1. Elongation: Over time, chains can elongate due to wear on the pins and bushings. Measure the chain’s pitch (center-to-center distance between pins) and compare it to the original pitch. If the elongation exceeds the manufacturer’s recommended limit, it’s time to replace the chain.

2. Chain Stretch: Chain stretch occurs when the chain has excessive play or slack when engaged with the sprockets. This can result from elongation and may lead to a loss of accuracy in the system’s operation.

3. Increased Noise: Excessive wear can cause the chain to produce more noise during operation. If you notice a significant increase in chain noise, it may indicate wear or inadequate lubrication.

4. Chain Damage: Inspect the chain for signs of damage, such as bent or broken links, cracked plates, or damaged rollers. Damaged components compromise the chain’s integrity and can lead to failure.

5. Rust and Corrosion: Chains used in corrosive environments may show signs of rust and corrosion. Corroded components can weaken the chain and reduce its load-carrying capacity.

6. Frequent Maintenance and Repairs: If you find yourself frequently performing maintenance and repairs on the chain, it may be an indication that it is nearing the end of its service life.

7. Chain Misalignment: Excessive wear can cause the chain to misalign with the sprockets, leading to uneven wear patterns on the chain components.

8. Loss of Tension: In applications where tension is crucial for proper chain engagement, a loss of tension could indicate wear or elongation.

9. Reduced Performance: If the system’s performance, such as speed or accuracy, is noticeably reduced, it could be due to chain wear affecting the overall functionality.

10. Maintenance Records: Keep detailed records of the chain’s maintenance and service life. Regularly inspect the chain and refer to maintenance records to determine if it has reached its recommended replacement interval.

When you observe any of these signs of wear, it’s important to replace the engineering chain promptly. Continuing to use a worn or damaged chain can lead to unexpected failures, production downtime, and potential damage to other system components. Regular inspections, proper lubrication, and timely replacement will ensure the reliability and longevity of the engineering chain in various industrial applications.

engineering chain

How do engineering chains perform in dusty or dirty environments?

In dusty or dirty environments, engineering chains face unique challenges due to the presence of contaminants that can affect their performance and longevity. However, many engineering chains are designed to handle such harsh conditions, and their performance can be enhanced with proper maintenance and considerations.

1. Sealing and Protection: Some engineering chains come with specialized seals or protective coatings to prevent dust, dirt, and other contaminants from entering the chain’s internal components. These seals help maintain the integrity of the lubrication and reduce the risk of abrasive particles causing wear.

2. Lubrication: Proper and regular lubrication is essential for engineering chains operating in dusty environments. Lubrication helps reduce friction and wear, flushing out contaminants that may have entered the chain. It’s crucial to use lubricants suitable for dusty conditions to prevent excessive buildup of dirt and debris.

3. Cleaning and Maintenance: Regular cleaning and maintenance are crucial to keep the chain functioning optimally in dirty environments. Removing accumulated dirt and debris helps prevent abrasive wear and elongation of the chain.

4. Material Selection: Choosing the right materials for the chain is vital for dusty environments. Chains with corrosion-resistant coatings or made from stainless steel can better withstand the abrasive nature of dust and dirt.

5. Chain Design: The design of the engineering chain can also influence its performance in dusty environments. Some chains have self-cleaning features or specific geometry that helps shed dirt and debris during operation.

6. Regular Inspection: Regular visual inspection of the chain can help identify signs of wear and contamination early on, allowing for timely maintenance or replacement.

7. Environmental Considerations: Understanding the specific conditions of the dusty environment is essential for selecting the most suitable engineering chain. Factors such as temperature, humidity, and the type of contaminants present should be taken into account.

8. Ingress Protection (IP) Rating: In certain industries, such as food processing or pharmaceuticals, engineering chains with specific IP ratings may be required to ensure compliance with hygiene and cleanliness standards.

In conclusion, engineering chains can perform well in dusty or dirty environments if properly selected, installed, and maintained. Regular cleaning, lubrication, and inspection are essential to ensure optimal performance and extend the chain’s service life in such challenging conditions.

engineering chain

How does an engineering chain differ from a standard roller chain?

Engineering chains and standard roller chains share similarities in terms of their basic design, consisting of interconnected links that engage with sprockets for power transmission. However, there are key differences between the two types of chains:

  • Application: Standard roller chains, also known as transmission chains, are primarily used for power transmission in industrial applications. They are commonly found in machinery, automotive, and other power transmission systems. On the other hand, engineering chains have a broader range of applications and are specifically designed for various industrial uses beyond pure power transmission.
  • Design and Construction: Engineering chains are available in different configurations and materials to meet specific industrial needs. They come in various types like drag chains, apron chains, leaf chains, and more, each tailored for a particular application, such as material handling, lifting, or conveying. Standard roller chains have a more standardized design with cylindrical rollers, providing smooth motion in power transmission applications.
  • Attachments: Engineering chains often feature attachments or extended pins that allow for the connection of specialized components or accessories. These attachments can be used for carrying loads, attaching products, or facilitating specific tasks in industrial processes. Standard roller chains, on the other hand, typically do not come with attachments.
  • Load Capacity: Engineering chains are designed to handle a wide range of loads, including heavy loads, abrasive materials, and harsh environmental conditions. They are built to withstand the demands of rugged industrial settings. Standard roller chains are suitable for general power transmission applications and may not be as robust as engineering chains in challenging environments.
  • Specialty Chains: Engineering chains include various specialty chains that cater to specific industries and applications, such as mining, agriculture, escalators, and more. Standard roller chains do not have the same diversity of specialized variants.

In summary, engineering chains are more versatile and adaptable, tailored to a broader range of industrial applications beyond power transmission. They offer a wider variety of designs, materials, and attachments to suit specific needs, making them suitable for demanding and specialized tasks in various industries.

China high quality Flexible Plastic Cable Chain Engineering Nylon Drag Chain  China high quality Flexible Plastic Cable Chain Engineering Nylon Drag Chain
editor by CX 2023-07-25

China Good quality Engineering Plastic Cable Chain POM Chain Delrin Chain

Product Description


engineering plastic cable chain POM chain delrin chain

Advantages:

1.A complete range of specification

2.free design offer OEM & ODM

3.free sample available

4.professional service team

5.specialize CNC machining and injection over 10 years

6.Custom accept as per drawing or sample

 

Model                  

inejction POM conveyor chain

Material

POM / Nylon/ PVC or customized

Diameter 1-250mm or customized
Length 500mm,1000mmor customized 
Color Natural,White,Black,ect.
OEM & ODM Yes
Certification ISO9001,SGS,FDA,RoHS,Test Report,ect.
Free Sample Yes
Density 1.6g/ cm2
Shape sheet, rod, tube, gear, pulley, guide rail……or according to your demand
Packing Plastic bags,Cartons,Wodden case,Pallet,Container,ect.
Advantage One stop procurement
 

HangZhou Engineering Plastics Industries,aiming at providing engineering plastics and injection plastic parts. Ccompany owns whole sets of imported manufacturing machines and advanced CNC machining machines,besides advanced process tools,company technology are also tremendous.

FAQ

Q: Are you trading company or manufacturer ?

A: We are manufacturer.

Q: How long is your delivery time?

A: According to the difficulty and quantity of product processing,a reasonable arrival time will be given to you.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What are the after-sale services?

A: In case of quality problems, the package can be exchanged within 90 days.

 

Material: Plastic
Structure: Leaf Chain
Surface Treatment: Polishing
Chain Size: 1/2"*3/32"
Feature: Fire Resistant, Heat Resistant
Certificate: ISO9001: 2008, Test Report
Customization:
Available

|

Customized Request

engineering chain

Can engineering chains be used in overhead or inverted applications?

Yes, engineering chains can be used in both overhead and inverted applications, provided they are properly selected and installed. These types of applications are common in various industries, including material handling, automotive, and food processing. Engineering chains are versatile and well-suited for such applications due to their robust construction, flexibility, and ability to handle heavy loads.

Overhead applications involve suspending the chain from overhead beams or structures, while inverted applications require the chain to run on the underside of the conveyor or equipment. Some factors to consider when using engineering chains in these applications include:

  1. Corrosion Resistance: For overhead applications in outdoor environments or areas with exposure to moisture, it is essential to use engineering chains made from corrosion-resistant materials, such as stainless steel, to prevent rust and ensure longevity.
  2. Lubrication: Proper and regular lubrication is crucial for chains in both overhead and inverted applications to reduce friction, wear, and noise levels. Lubrication also helps protect the chain from contaminants and moisture.
  3. Load Capacity: Ensure that the engineering chain selected has a sufficient load capacity to handle the weight of the conveyed materials or equipment in the application.
  4. Installation: Proper installation is critical for the smooth operation of the chain in overhead and inverted applications. Correct tensioning and alignment will help prevent premature wear and improve overall performance.
  5. Chain Speed: Consider the speed at which the chain will be running in the application, as higher speeds may require additional considerations in terms of lubrication and wear.

By taking these factors into account and following the manufacturer’s guidelines for installation, lubrication, and maintenance, engineering chains can be used effectively in overhead and inverted applications. They offer reliable and efficient power transmission and material handling solutions, making them valuable components in a wide range of industrial processes and systems.

engineering chain

How do engineering chains handle product accumulation and spacing in conveyor systems?

In conveyor systems, product accumulation and spacing are essential considerations to ensure smooth and efficient material handling. Engineering chains play a crucial role in managing product flow and maintaining proper spacing between items. Here’s how they handle these tasks:

1. Accumulation: Engineering chains can be designed with special attachments that allow for product accumulation. These attachments create zones on the conveyor where products can accumulate without interrupting the overall conveyor operation. The accumulation zones are usually equipped with sensors or photo eyes to detect product presence and control the chain’s movement, preventing collisions and jams.

2. Spacing: To achieve proper spacing between products on the conveyor, engineering chains may be equipped with specially designed attachments or guides. These guides ensure that each item is evenly spaced from the one in front of it, preventing product collisions and maintaining a consistent flow. The spacing between products can be adjusted by modifying the length of the conveyor or changing the attachment configuration on the chain.

3. Timing and Synchronization: In automated conveyor systems, engineering chains are often used to synchronize the movement of products. Through precise control and positioning, the chain ensures that items are released at the correct intervals, maintaining the desired spacing and preventing congestion.

4. Low Back Pressure: Engineering chains can be designed with low back pressure accumulation, which allows products to accumulate while maintaining gentle contact with each other. This reduces the risk of damage to delicate or sensitive items and improves overall product handling.

5. Diverter and Merge Solutions: Engineering chains can incorporate diverters and merge units to redirect products to different conveyor lines while maintaining proper spacing. These units efficiently manage product flow and distribution in complex conveyor systems.

6. Customization: Manufacturers can customize engineering chains to suit specific product sizes, weights, and handling requirements. This ensures optimal performance and reduces the risk of jams or disruptions in the conveyor system.

Overall, engineering chains are integral components in conveyor systems, enabling effective product accumulation and spacing. Their precise control, customizability, and synchronization capabilities contribute to the smooth and efficient operation of material handling processes in various industries.

engineering chain

How does an engineering chain differ from a standard roller chain?

Engineering chains and standard roller chains share similarities in terms of their basic design, consisting of interconnected links that engage with sprockets for power transmission. However, there are key differences between the two types of chains:

  • Application: Standard roller chains, also known as transmission chains, are primarily used for power transmission in industrial applications. They are commonly found in machinery, automotive, and other power transmission systems. On the other hand, engineering chains have a broader range of applications and are specifically designed for various industrial uses beyond pure power transmission.
  • Design and Construction: Engineering chains are available in different configurations and materials to meet specific industrial needs. They come in various types like drag chains, apron chains, leaf chains, and more, each tailored for a particular application, such as material handling, lifting, or conveying. Standard roller chains have a more standardized design with cylindrical rollers, providing smooth motion in power transmission applications.
  • Attachments: Engineering chains often feature attachments or extended pins that allow for the connection of specialized components or accessories. These attachments can be used for carrying loads, attaching products, or facilitating specific tasks in industrial processes. Standard roller chains, on the other hand, typically do not come with attachments.
  • Load Capacity: Engineering chains are designed to handle a wide range of loads, including heavy loads, abrasive materials, and harsh environmental conditions. They are built to withstand the demands of rugged industrial settings. Standard roller chains are suitable for general power transmission applications and may not be as robust as engineering chains in challenging environments.
  • Specialty Chains: Engineering chains include various specialty chains that cater to specific industries and applications, such as mining, agriculture, escalators, and more. Standard roller chains do not have the same diversity of specialized variants.

In summary, engineering chains are more versatile and adaptable, tailored to a broader range of industrial applications beyond power transmission. They offer a wider variety of designs, materials, and attachments to suit specific needs, making them suitable for demanding and specialized tasks in various industries.

China Good quality Engineering Plastic Cable Chain POM Chain Delrin Chain  China Good quality Engineering Plastic Cable Chain POM Chain Delrin Chain
editor by CX 2023-07-24

China manufacturer 35*100mm Plastic Nylon Flexible Cable Carrier Metal Energy Hose Wires Drag Tracks Chain for 3D Printer roller chain sprocket

Product Description

PA66 (nylon) material cable carrier protective chain cable drag chain for 3D printer
Product Description 
We are a manufacturer of high quality plastic zippers in ZheJiang , China. 
Other Details
Drag chains are simple guides that are used to encompass (protective) different types of hoses and cables
A drag chain helps to minimize the wear and tear on the hose or cable it protects, while also helping to ease the degree of the tangle that can sometimes occur with extended lengths of hose. As such, the chain can also be seen as a safety device

H35 Inner height × inner width Outer height × outer width
35*38 55*63
35*50 55*75
35*60 55*85
35*75 55*1 square CZPT and the existing plant area is 15, with a complete global logistics and distribution system to ensure that customer goods are delivered safely and on time! 
The implementation of logistics supply guarantee system, through the signing of logistics companies to quickly deliver all the distribution goods to the local area. 
Can you send us the sample for testing? 
Yes, a small number of samples are free, but the freight must be paid in advance or charged. 
The quality of the product you want to buy is the same as that of the sample. 
Send samples free of charge to make your choice more accurate! 
Free delivery, you can get more product information! 
As long as you have a phone, our customer service and business development team will contact you enthusiastically in time! 
At present, our No. 1 company is actively implementing 4 major projects: technology development, quality brand creation, market expansion and personnel training, so as to build the company into a modern enterprise with modern management, brand internationalization, product technology and global sales. 
Work hard. 
To build the world’s leading efficient service provider, high-quality supplier and professional manufacturer of industrial products. 
What are your terms of payment? 
Our company has opened a US dollar account in New York, USA,
and the beneficiary: (payee) Xihu (West Lake) Dis. CZPT CNC Machine tool Accessories Manufacturing Co., Ltd. 
Us dollar account: 3700571 . 
What time is the delivery time? 
Sign the order on the same day, deliver the goods on the same day, and deliver the customized products within 10-20 days. 
How are the goods packed? 
Our company has a special wooden case for export without fumigation, which can be pasted according to customer requirements: marking. 
Can you print on the product according to our requirements? 
Yes, if you buy our products, we can print pictures or words on the products, such as your logo, brand and so on.

Shipping Cost:

Estimated freight per unit.



To be negotiated
After-sales Service: 24h
Warranty: 1 Year
Logo Printing: Without Logo Printing
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

chain

Tips for Buying Roller Chains

There are several things to consider when buying a new roller chain. Chains can be heavy-duty roller chains or self-lubricating chains. These factors all affect the wear of the roller chain. Proper lubrication and adjustment are important to prolong the life of the chain. Here are tips for buying a new roller chain. Some common types of roller chains are listed below. The type you choose depends on its purpose.

Bushingless Roller Chains

The tensile strength of a bushingless roller chain is often the primary measure of its durability. It represents the maximum load a chain can withstand before breaking, but fatigue strength is just as important. Factors that affect fatigue strength include the steel used to manufacture the chain, the quality of the pitch holes, the type of shot peening used, and the thickness and design of the chainplates. Here are some tips on how to test the fatigue strength of bushless roller chains.
The inner link plate 130 is thicker than the outer link plate 120. This feature helps the connecting pins and rollers remain stable. This feature reduces wear and noise. It also improves the overall durability of the chain. Unlike traditional chains, bushingless roller chains are easier to maintain than comparable chains. They also reduce the risk of sprocket wear. Bushingless roller chains are ideal for demanding applications where noise is a concern.
Unlined roller chains are generally less expensive than lined roller chains. Bushings are integrated into the inner plate, while those in conventional chains are inserted into the outer plate. The result is lower cost and more flexible lateral movement – a requirement for modern derailleur gearing. But with all these advantages, choosing a linerless chain is still essential. You should read reviews about the durability of bushingless roller chains before buying.
In its simplest form, the connecting pin 140 is pressed into the pinhole 126 in the direction of chain travel. Connecting pins 140 extend through these holes to connect the inner link plate and the rollers. The connecting pins can also be welded to the outer link plates. During assembly, chain C can be efficiently assembled from one side in the engine width direction. If you have an older car, you can try the bushless version and see how it goes.
Another variation of bushless roller chains involves sprockets and connecting pins. The outer link plate has connecting pins extending through holes in the inner link plate. The rollers are able to rotate on the connecting pins, thus lubricating them. There are two types of bushingless roller chains: connecting pin chains and sprocket chains. These two types of bushingless roller chains are generally interchangeable.
Linerless roller chains can contain chain guides. During the riveting process, the outer and inner link plates compress against each other, reducing friction and power loss. ANSI Standard B29.1-2011 is designed to make it easier for you to choose the right chain for your vehicle. This version is also quieter, reducing noise. In addition to improved efficiency, bushingless roller chains offer better durability. It is easier to install and less expensive to maintain.

Single Strand Heavy Duty Roller Chain

Single Strand Heavy Duty Roller Chains, also known as Single Strand Heavy Duty Roller Chains, are available in a variety of sizes. These chains run on standard roller sprockets and have thicker side plates. These increase their tensile strength, fatigue rating and overall working life. Monostrand chains are available in three quality levels: riveted, open and closed.
If your chain needs to be replaced, your best bet is to buy replacement parts. Single strand roller chains are usually ten feet long. For larger sizes, consider purchasing a single-strand heavy-duty roller chain that is three times longer. This way, you don’t have to worry about damaging your machine. Oregon roller chains are manufactured to OEM standards.
CZPT Plus Heavy Duty Roller Chains feature solid rollers for light to medium duty applications. It meets ANSI B29.1 durability standards and is ideal for light to medium duty applications. CZPT Plus Heavy Duty Roller Chains have solid bushings in selected sizes to ANSI B29.1. CZPT Plus heavy duty roller chains are supplied with ample lubricant. If your application requires heavy duty roller chains, you can find them at CZPT Chain and Sprockets.
In addition to single-strand heavy-duty roller chains, there are three-strand heavy-duty roller chains. These chains can withstand enormous pressure and are ideal for applications in agriculture, sewage treatment, machinery, and more. They are designed to last for years without breaking. So whether you’re looking for a heavy duty roller chain for your farm equipment or construction, American Roller Chain has you covered.
In order to choose the right size for your needs, you must first determine the diameter and overall width of the roller chain. You also have to measure the width of the drum itself. This information will determine how many chains you need to order. The measurement and selection of dimensions will determine the cost of your new roller chain. Buying the right roller chain is simple and convenient if you understand all of these factors. So use a caliper and make sure the roller chain is measured correctly.
The size of a single strand heavy duty roller chain is critical to the stability of your business. You can save a lot of money by buying a high-quality roller chain. Just make sure to store it properly. Its shelf life is virtually unlimited. When properly stored, a single-strand heavy duty roller chain can improve the stability of your business for years to come. A single-strand chain is an affordable investment that will pay dividends for your business.
chain

Self-lubricating roller chain

Self-lubricating roller chains can be used in a variety of applications. This type of chain is an excellent choice for areas that cannot be manually lubricated. It also reduces the risk of contamination as no lubricant is required at all. Self-lubricating roller chains are available in a variety of designs and are compatible with a wide variety of food applications. If you’re interested in learning more about such chains, keep reading!
There are two main types of chains of this type: DIN ISO 606 and DIN 8187. They are similar in construction to traditional chains, but are more durable. They have higher friction and wear resistance than traditional roller chains. These chains are also very effective in applications that require a lot of moisture and water flushing. They require less maintenance and can last a long time. Another benefit of self-lubricating chains is that they last longer than regular roller chains, which can be quite expensive.
Another self-lubricating roller chain is the non-lubricating type. These chains are internally lubricated and isolated from the external environment. Ideal for low to high load applications, these chains will last 5 to 20 times longer than comparable initially lubricated roller chains. Self-lubricating roller chains have so many advantages, you’ll be glad you bought one.

China manufacturer 35*100mm Plastic Nylon Flexible Cable Carrier Metal Energy Hose Wires Drag Tracks Chain for 3D Printer   roller chain sprocketChina manufacturer 35*100mm Plastic Nylon Flexible Cable Carrier Metal Energy Hose Wires Drag Tracks Chain for 3D Printer   roller chain sprocket
editor by CX 2023-06-09

China Olearn R18 10mm X 10mm (Inner H X Inner W) Black Plastic Cable Wire Carrier Drag Chain 1m Length for CNC, with End Connectors – Bridge Type (Non-openable) manufacturer

Item Description

     CZPT 5x5mm Wire Provider Cable Drag Chain for CNC Router Engraving Device Roller Plastic Transmission Chain Business

 

 

 

1) Ideal for use in a reciprocating movement of the situation, can be created-in cable, tubing, pipe, water pipes, and many others. perform a traction and protection role.

two) Towline can not open . Motion, reduced sound, put on-resistant, large-velocity motion.

3) The Drag chain has been broadly utilized in CNC device equipment, electronic tools, fireplace machinery, CZPT machinery, glass machinery, doorways and home windows machinery, injection molding machines, robots, chubby transportation tools, automatic warehouses and so on.

Features:

1.The appearance is stunning, and surface area gloss.

two.Bolstered nylon, low temperature resistance, wear resistance, corrosion resistance.

Drag chain uses:

1) Ideal for use in a reciprocating movement of the celebration, can be developed-in cable, tubing, pipe, h2o pipes, and so on. engage in a traction and protection role.

2) Towline can not open . Movement, reduced noise, dress in-resistant, high-pace motion.

three) The Drag chain has been commonly employed in CNC equipment instruments, digital tools, fire machinery, CZPT machinery, glass equipment, doorways and windows equipment, injection molding equipment, robots, over weight transportation gear, automatic warehouses and so on.

Beneath is our regular size, if no located the size  you require, pls contact vendor immediately. 

 

Our Company 
OLEARN is trademark model in China, owned by HangZhou CZPT Technology Co., Ltd.
We target on generic 3D printer parts and CNC components, inventory all of them for rapidly supply.
Welcome to inquiry for more depth about 3d printer spare components and cnc areas.
Listed here is our business office internet, welcome to open up and look through!

BE YOUR CHINA SOURCING AGENT
Howdy absolutely everyone,If you want to buy item from China, make sure you give me your product list, allow me give you a estimate. Our firm is focused on offering CNC/3D PRINTER components and accessories. We have our very own CNC processing plant, and cooperate with some other factories, this will help management fees and make sure top quality.
If you want to perform with individual who can make your china sourching function a lot more convenient and productive,our firm will be your ideal pick!

Payment

– We accept T/T,Western Union and Paypal.

 

Shipping
For the delivery situation, we cooperate with a expert forwarder organization which would deal with all the issues for you throughout the shipping procedure with 7~ten operating days super quick arrival time. 
Also if you had formal Convey Account, we can also supply the products to you by means of Formal Convey immediately.

FAQ
Q:What is the merchandise prepared time?
A:If we have enough units in stock, the products completely ready time would be within 3 functioning days.

Q:Do you supply samples ? is it free of charge or extra ?
A: Of course, we could offer the sample for cost-free cost but do not pay the value of freight.

Q:What is your cost time period.
A: Typically FOB CIF CFR EX-perform,DDP,DDU and many others.

Usage: Drag Chain
Material: Nylon PA66
Surface Treatment: None
Feature: None
Chain Size: 5*5mm
Structure: Bridge(No Open)

###

Samples:
US$ 2.5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Usage: Drag Chain
Material: Nylon PA66
Surface Treatment: None
Feature: None
Chain Size: 5*5mm
Structure: Bridge(No Open)

###

Samples:
US$ 2.5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

What to look for in a roller chain

There are many different factors to consider when purchasing a roller chain. One of the most important factors is tensile strength, which represents the force required to break the chain. Roller chains are available in three different tensile strengths: minimum, average and ultimate. Each strength reflects a different limit to the load the chain can handle. However, these limits are not always equal and you should be aware of the differences between roller chains.

Canonical chain

Most roller chains have standard sizes printed on the side panels. This is usually “40” or “C2080H”, but can also be the letter “B”. If the chain is old, it will need to be cleaned to see its size. You can find the size on the standard roller chain size chart, but not everyone is marked. To determine the size, measure the diameter and pitch of the chain, then compare the results to the chart to see what size you need.
Heavy-duty roller chains are available with heat-treated pins, side plates, and rollers. In addition to being heat treated, they are also factory pre-stretched, which reduces wear on these parts. If properly maintained, they can last for years, reducing the risk of failure or corrosion. Depending on the application, standard roller chains are available in different sizes. It can be purchased separately. There are several options to choose from, depending on the size and strength of the application.
PEER roller chains contain solid rollers to reduce shock loads on the sprocket teeth. Heat treating and preloading all components of the PEER chain helps minimize initial elongation. Hot-dip lubrication ensures complete lubrication of all chain components, extending their life and reducing maintenance costs. For heavy-duty applications, ASME/ANSI-B29.1 chain is a good choice.
Standard roller chains are made of steel or alloy steel. However, it can be made of other materials such as stainless steel. In addition to steel, stainless steel is often used in food processing machinery where chain lubrication is an issue. Brass and nylon are also sometimes used. However, they are not that popular. Therefore, you should always check with your supplier before purchasing. By comparing the tensile strength of two different chains and making an informed decision, you can get the best price and service.
chain

Chain without bushing

Bushless roller chains have advantages over conventional roller chains. Unlike conventional chains, bushless chains have extensive lateral flexibility, which increases the chain’s lubrication flow. The inner plates of bushless chains have protruding shoulders so the oil can flow through them more easily and efficiently. This is an important characteristic of a smooth-running chain. Additionally, bushless chains may have improved shifting performance.
The strength of a bushingless roller chain is measured in terms of tensile strength and fatigue strength. The former measures the load a chain can withstand before breaking. Fatigue strength is equally important, and factors that affect fatigue strength include the steel used to make the chain components, the pitch hole fabrication, the type of shot peening on the chain, and the design and thickness of the chain. For example, if the chain is too thin, it may not be enough for heavy-duty applications.
Like traditional roller chains, bushingless roller chains have two different types of links. The inner link has two inner plates connected by pins, while the outer chain has two outer plates held together by bushings. A bushingless roller chain is similar to a traditional chain, except it eliminates a step in the assembly process by stamping the tube into the inner plate. So if you want a smoother ride, a bushingless roller chain is a better choice.
There are two different sizes of bushingless roller chains. One size is designed for use with standard single-strand chains, while the other size is designed for use with double-strand or triple-strand chains. Bushless chains are generally shorter than conventional chains, so they can fit in tighter spaces. Bushless chains are made of the highest quality materials. These chain attachments are case hardened for optimum strength and durability.

Mute chain

The silent roller chain has a smooth, low-noise drive. They are made of stacked rows of flat chainplates with a gear-like profile that meshes with the sprocket teeth. Each chainplate is attached to a corresponding sprocket, which also allows the chain to bend. While these basic components are the same for every silent roller chain, there are many variations that allow them to be used in a variety of applications.
The most popular high-speed transmission, silent chains feature gear-like sprockets. They can be made from single or multiple strands of material. Single-strand chains are less expensive than multi-strand chains, but they tend to wear out faster if not lubricated. Single-strand roller chains can be used for years without lubrication, but for your application, wide silent chains are still worth considering.
The design and construction of silent chains make them ideal for conveying a wide variety of products. They have flat, heat-resistant surfaces. They are also durable and non-slip. They are available in a variety of pitch sizes, widths, and mounting styles. Whether you need chains for general purpose conveyors or glass bottle transport applications, we have you covered. Ask about the benefits of silent roller chain conveyors.
Inverted tooth chains are another option for quieter chains. These chains are designed to reduce noise from engine-related friction. Silent chains are more common, and manufacturers have fallen in love with them. A silent chain consists of several links connected to the sprocket teeth. Teeth rotate to reduce noise, vibration, and chord action. These are the main reasons why silent chains are so popular.
chain

ANSI chain pitch

To measure your bike’s chain pitch, you can use a caliper. This measurement is taken from the center of the rolling pin to the center of the next rolling pin. Chains come in many sizes, but ANSI is the most common chain standard in the United States. A caliper is handy if you’re not sure which size to buy, as it allows you to check for worn sprockets.
Chains that meet ANSI standards will be characterized by a certain pitch. This measurement is based on the width and spacing of the roll. The spacing is usually greater than the width. The standard number will be the right number for the width of the chain or the left number for the rollers. The number on the left indicates whether the chain is lightweight or heavyweight. Heavyweight chains are designated by the suffix “H”.
Common chain sizes are based on ANSI chain pitch. Pitch is the minimum distance between bushing and sprocket. The smaller the chain pitch, the greater the total distance between the two points. This means the chain will last longer. However, if you are buying a chain for a specific application, you should check the pitch carefully as it can affect the performance of the chain.

Roller chain wear measurement

The purpose of roller chain wear measurement is to prevent breakage by monitoring the strain on the chain. There are several ways to measure roller chain wear. The first is to remove the chain from its working position and measure the distance from the sprocket to its measuring end. Another way is to measure the pitch of the chain or the distance between two pins. This method is superior to other methods because it is convenient and accurate.
When measuring the wear of a roller chain, it is important to note that the elements of the chain will gradually deform. About 3.75% of the total wear will be on the pins and the rest will be on the internal links. These wear measurements will vary based on the nominal pitch of the chain and the amount of friction the chain is experiencing. Proper lubrication between pins and bushings, load and frequency of articulation all affect wear rates.
It is important to measure the amount of wear on the roller chain to avoid excessive machine failures. The longer the chain runs, the more wear it will wear. Although the length of the chain should be less than the center distance, the excessive load will cause premature wear. Therefore, lubrication is essential. Additionally, the sag of the chain should not exceed 2% to 4% of its center-to-center distance. Finally, check for unusual noise or visible defects. A common cause of excessive roller chain wear is the size of the load. Every chain manufacturer sets a maximum workload for its product.
There are several ways to measure roller chain wear. If using a high-speed drive, it should have at least 11 teeth, and a medium-speed drive should have at least 25 teeth. Also, be sure to check the length of the chain, even if you should. The same goes for the pin diameter, which should be the same or different pitch as the roller chain.

China Olearn R18 10mm X 10mm (Inner H X Inner W) Black Plastic Cable Wire Carrier Drag Chain 1m Length for CNC, with End Connectors - Bridge Type (Non-openable)     manufacturer China Olearn R18 10mm X 10mm (Inner H X Inner W) Black Plastic Cable Wire Carrier Drag Chain 1m Length for CNC, with End Connectors - Bridge Type (Non-openable)     manufacturer
editor by czh 2023-01-05

China wholesaler YHD H15X38 R28 R38 R48 Cable Carrier Protective Bridge Engineering Plastic Drag Chain High Quality for Automatic CNC Machine with Best Sales

Condition: New
Sort: Drag Chain
Content: Engineering Plastic, Engineering Plastics
Applicable Industries: Garment Retailers, Creating Materials Shops, Manufacturing Plant, Machinery Restore Retailers, House Use, Printing Shops, Development works , Strength & Mining, Other
Weight (KG): .1
Showroom Location: None
Movie outgoing-inspection: Provided
Machinery Examination Report: Supplied
Advertising and marketing Variety: New Solution 2571
Brand: YHD
Model: VBY02-1538
Guarantee: 1 12 months
Core Parts: Motor
Operate: Cable Security
Software: Shifting Cable Security
Construction: Blended Chain
Internal Size: 15*38mm
Bend radius: R28 R38 R48
Solution Name: Cable Drag Chain
Shade: Black
Goal: Defend Wire Cable Tube
Temperature Variety: -twenty~100℃
Packaging Particulars: Carton or wooden box packaging
Port: HangZhou

Seller Suggest Installation Instructions TIPS: YHD H15X38 R28 R38 R48 Cable Provider Protective Bridge Engineering Plastic Drag Chain High Top quality for Automatic CNC Machine1. Really crucial! You should refer to the table underneath cautiously to pick the specification of drag chain you want, Make sure you speak to client support to validate ahead of inserting an purchase.2. We supply a detailed PDF type for your reference. If necessary, remember to speak to consumer services to deliver it to you.3. Far more importantly, we also supply 3D types, which can be imported into 3D software program for direct use. Each design offers various 3D and Second structure graphics information, including hundreds of formats these kinds of as Catia, Solidworks, IGS, Stage, DWG, and so on., which is practical for you to use directly when creating, reducing the problems of drawing. If necessary, make sure you make contact with customer service. Product Paramenters Details Images Why Decide on Us FAQ 1: Are you manufacturing unit or only firm?We are a maker with over 2000 workers2: Why we can pick you?1) Professional– We have labored in the this business for a lot more than ten years,our products have been tested by 50000+ clientele.2) Trustworthy — We are a true manufacturing unit, we follow theory of get-earn.3) Competitiveness — All goods are created inside our factory, brief back links of transaction is going to help save your income.3: How about the shipping and delivery value?We will give you options on various shipping way for your assortment depending on your order4: How about the price?Ultimate quotation is in accordance to getting total description of the solution you want, dimension, material, quantity and so on.5: How about the sample time? What about the payment?The sample will arrive on your palms soon after your payment completed 7-fifteen days.T/T, thirty% deposit, harmony before cargo, we can settle for versatile payment by West Union, Paypal, Credit score card etc.

Roller Chain Basics

Before choosing the right roller chain for your machine, it is necessary to learn some basics. Learn about sprockets, tensile strength, pitch, and width. Read this article to learn more. It will help you make an informed decision. Getting the right product is critical, but it’s not always as simple as choosing a brand name. You need to choose a company that supports its products and provides good service.
chain

Roller sprocket

If you are planning to purchase roller sprockets for your application, you should first look at the various types available. Sprockets available for single-strand roller chains are manufactured by Boston Steel – Type B sprockets are drilled to size. They are available in 1/4, 3/8, 1/2, 5/8, 3/4 and 1″ pitch sizes.
The diameter of the sprocket is important when choosing the right sprocket for your application. Using a caliper to measure the diameter of a toothless plate is a good way to determine the exact size of the sprocket. A caliper is the diameter of a plate without teeth. On Type B and C sprockets, the hub diameter measures the thickness of the hub.
Another type of sprocket is the steel split sprocket, which is split in diameter. This type is easy to install and remove, and is held together by bolts in the hub. Typically, split sprockets have chain pitches ranging from 40 to 240 and bores ranging from 3/4″ to 6″. The split sprockets are designed with one pointing towards the ceiling and the other two parallel to the floor.
When shopping for sprockets, it is important to remember that they are designed specifically for a specific chain. All chains are manufactured to specific standards. In the United States, the most common standard is ANSI. The chain pitch is the distance between the center of each pin and the center of the next pin. In the US, the standard is always measured in eight-inch intervals.
In addition to sprocket size, sprocket pitch and the surface area also affect chain life. Unlike belt sprockets, which are made of forged steel, the teeth on roller sprockets are stamped from steel sheet or pressed from powdered metal. The harder the teeth, the longer the chain will last.

Roller chain pitch

The pitch of a roller chain is the distance between the sprocket and the pin. The smaller the thread pitch, the smaller the bushing wear. Generally speaking, the smaller the pitch, the longer the life of the chain. For best performance and longest life, manufacturers recommend a minimum chain pitch of 2% to 3%. Chain pitch is important to ensure proper performance, and the manufacturer recommends that you replace the chain when it reaches 2% to 3% of normal.
To determine the correct chain pitch for a particular chain, first determine the sprocket size and pitch. Pitch is the distance between pin centers, measured in 1/8 inch increments. The pin diameter of the chain is also important. If you’re not sure about the pin diameter of your chain, measure a few links to get a good average reading. Alternatively, use a caliper to measure the inside diameter of the sprocket and count the number of teeth.
When sizing a sprocket, measure the chain between the gears with a caliper and compare it to the measurements on the chain size chart. Make sure you have checked all the specs and checked the correct chain pitch. Then, choose the correct chain pitch for your needs. This is a critical step in choosing the right chain. So get the correct pitch for your roller chain. Correct pitch helps ensure maximum performance and safety.
To identify a specific type of roller chain, measure its tensile strength. This represents the amount of load the chain can withstand before breaking. Another key parameter to consider is fatigue strength. Chains with high fatigue strength are more resistant to rust and wear than chains with low fatigue strength. The numbers on the right in the standard numbering represent normal or light duty chains, while the numbers on the left represent the pitch of heavy-duty chains.
Double pitch roller chains are a variant of single pitch chains. They are manufactured according to ISO 606 and meet the same standards as single pitch chains. They are mainly used in applications with lower requirements for speed and power transmission. The plates of double pitch roller chains are also longer than single pitch chains. The double pitch drive series is also used for elevator and long conveyor drives. There are three main types of roller chains: single-pitch chains, double-pitch carriers, and oversized rollers.

Roller chain width

When buying a roller chain, one of the first decisions you must make is its width. To make this determination, you need to measure the overall width of the chain, the diameter, and the width of each roller. You must also know the height and thickness of the board. After taking these measurements, you can start shopping for the perfect roller chain. But before you buy a new chain, it’s important to know what to expect from the chain itself.
There are many different types of roller chains. These chains are available for ANSI and metric measurements. They come in single-stranded and double-stranded variants. They are usually used for power transmission. Other types include agricultural, automotive, conveyor, multi-strand, and four-strand chains. These charts also include a chart so you can easily see the exact size you need. Listed below are some of the benefits of buying a roller chain.
Roller diameter and pin diameter are important factors in choosing the correct chain width. The width of the chain is the nearest binary fraction of 5/8 of an inch. It should be at least half the thickness of the sprocket, and the plate thickness is one-eighth the width of the chain. Overweight chains are indicated with the suffix H. The pitch and width of the chain are determined by the working load and machine speed.
The outer links of the roller chain are called pin links. These pins are inserted into the bushings of the adjacent roller links. They are held in place by cotter pins. Pin links are usually pressed into the pins of heavy-duty chains. These pins are used to hold the rollers in place. However, these pin chains can reduce the power rating of roller chains by up to 20%.
The ANSI 29.1 Steel Chain Specification specifies a minimum pitch in inches and ultimate strength of 12,500 x pitch in inches. At the same time, the O-ring chain greatly reduces wear due to its lubricating effect. O-ring and X-ring chains contain a lubricant injected by vacuum when riveting the chain together. Transmission chains are tested and governed by standards bodies such as ANSI. In 2011, the American Society of Mechanical Engineers developed a standard for precision power transmission chains.
chain

Roller chain tensile strength

One of the most important indicators of roller chain strength is tensile strength. This measurement refers to the amount of load the chain can withstand before breaking. Another measure, called fatigue strength, refers to the maximum load a chain can withstand before it breaks. The strength of a roller chain depends on its size, the quality of the steel used in its construction, and the heat treatment. There are also differences in the types of shot peening used to treat steel, pitch holes, and link plates.
When choosing a roller chain, the workload is critical. This is the maximum load the chain can withstand before fatigue failure occurs. This measurement is critical because it helps determine the type of load applied to the chain. When deciding which roller chain to buy, be sure to consider the mechanical type and desired strength. Then, make sure it meets strength and load-carrying capacity requirements.
The ultimate tensile strength of a roller chain is based on the manufacturer’s recommended maximum tensile strength. However, the actual tensile strength may be higher or lower than this value. The working load limit of a roller chain can also be calculated by multiplying the chain diameter by the grade. The working load limit of a chain is the highest tension it can withstand before breaking. This value is usually expressed in points.
The maximum tensile strength of roller chains varies by chain type. The single-strand heavy chain has thick side plates for higher shock loads. Single strand heavy-duty roller chains, also known as “bushing” roller chains, are also available. Double-stranded heavy chains are structurally similar, but they have two layers of steel connected by pins that are nearly twice as strong as standard roller chains.
The tensile strength of a single-strand roller chain is approximately 500 tons. In comparison, a single-chain blockchain has a tensile strength of 900. The tensile strength of the two is similar, and it is not recommended to choose one or the other. Although steel and titanium chains are considered the strongest materials for roller chains, these materials are not magnetic.

China wholesaler YHD H15X38 R28 R38 R48 Cable Carrier Protective Bridge Engineering Plastic Drag Chain High Quality for Automatic CNC Machine     with Best SalesChina wholesaler YHD H15X38 R28 R38 R48 Cable Carrier Protective Bridge Engineering Plastic Drag Chain High Quality for Automatic CNC Machine     with Best Sales
editor by czh